Both the Google Pixel 7 and 7 Pro surfaced in CAD-based renders recently. Well, thanks to that information, 3D printed Pixel 7 and 7 Pro models appeared online. These have been published by Pigtou, in collaboration with David Kowalski.
3D printed Google Pixel 7 & 7 Pro models appear
These models are made out of plastic, and are fully based on the leaked CAD renders. If you take a look at the image provided below, you’ll see the two models pose side-by-side.
This image should give you a really good idea as to how different they are in terms of size. The difference in size will be bigger than it was between the Pixel 6 and 6 Pro. That is a good thing, as the Pixel 6 and 6 Pro were too similar when it comes to size.
The Google Pixel 7 will, allegedly, measure 155.6 x 73.1 x 8.7mm (11.5mm with the camera bump). The Pixel 7 Pro, on the other hand, will measure 163 x 76.4 x 8.7mm (11.2mm with the camera bump).
On top of that, the Pixel 7 will include a flat display, while the ‘Pro’ model will arrive with a curved one. There will also be some difference when it comes to rear cameras, as the Pixel 7 Pro will include an extra camera on the back.
The Pixel 7 will include one less camera, and be smaller
If we had to guess, we’d say that the Pixel 7 will ship with wide and ultrawide cameras, and the ‘Pro’ model will add a periscope telephoto unit on top of that. The two phones will offer a similar design language, though. They will actually resemble their predecessors in that regard, quite a bit.
Both phones are expected to ship with the second-gen Google Tensor SoC. The ‘Pro’ model is expected to offer a 120Hz display, while the regular model will include either a 90Hz or a 120Hz one. Both will be OLED, though.
Android 13 will come pre-installed, and both phones will likely be made out of metal and glass. These two phones are expected to launch in Q3 or Q4 this year (September or October).
2022-03-04 15:05:24