This Google Pixel 7 Pro Concept Design Is Probably Quite Accurate

The Google Pixel 7 Pro surfaced in CAD-based renders recently. Those renders basically revealed the design of the phone. Now, the Pixel 7 Pro concept video appeared, and the design of the phone is based on those CAD renders, so it’s probably quite accurate.

This Pixel 7 Pro concept design is based on CAD renders

This video, and accompanying images, come from Letsgodigital and Technizo Concept. The designer did a really nice job here, bringing those CAD renders to life. As you can see, the Pixel 7 Pro will likely resemble the Pixel 6 Pro quite a bit.

The phone has a similar shape, and the overall design is quite similar as well. A display camera hole will be centered, while the bezels will be thin. This phone will also include a curved display, and a large camera strip on the back.

The camera sensors inside that camera strip will be placed in different spots. They likely won’t be as visible as is shown in this video / images, of course, but this has been done to give you a good look at them.

All the physical keys will sit on the right-hand side of the device, with the power/lock key being placed above the volume rocker buttons. The SIM card tray will be accessible from the left.

The phone won’t include a 3.5mm headphone jack, while its Type-C port will sit at the bottom. Next to it, you’ll notice a cutout for the phone’s main speaker.

Not much is known about its specs

We don’t know much about the phone’s specs, but it is expected to feature the second-gen Google Tensor SoC. Its display will be sized somewhere between 6.7 and 6.8 inches. It will be a QHD+ OLED display with a 120Hz refresh rate.

The Pixel 7 Pro will probably keep the same main camera sensor as the Pixel 6 Pro, the 50-megapixel ISOCELL GN1. If you’d like to know more about the device, check out our preview.