Everything you need to know about the Google Pixel 9a screen size

The Google Pixel 9a has arrived and the screen size is no doubt one of the specifications most people are curious about. Google hasn’t changed much with this phone when you compare it to the original Pixel 9, but there are certainly differences.

For example, the screen size of the Pixel 9a hasn’t changed, and it’s still an Actua Display. Having said that, the usable display area is slightly different. You might not notice it at first glance, or even at second glance. It is different though, and it’s a lot easier to tell if you look at the two phones side by side. It all comes down to the bezels around the display. They’re slightly thicker than those on the Pixel 9.

For some this won’t be as visually appealing, but it does make for a phone that’s easier to use one-handed. Mainly because there’s that little bit of extra non-interactive glass around the edges. The thicker bezels also make it harder to have accidental touches, which can be a tad annoying to deal with over time if it keeps happening.

The Google Pixel 9a screen size is 6.3 inches

At 6.3 inches the screen size of the Pixel 9a should feel perfectly usable, as it’s big enough to enjoy viewing content and more than big enough to interact with comfortably. In addition to the size, the display has an aspect ratio of 20:9, with a pixel density of 422.2 PPI. It also has a resolution of 1080 x 2424. The refresh rate is a range from 60Hz to 120Hz. What this means is that the refresh rate will adjust based on the content.

For example, the 120Hz refresh rate will be available for some apps and content, but not others. Unlike some phones, you won’t be able to keep the refresh rate at 120Hz for everything. That shouldn’t be an issue for most people, though. This is the same as it is on the Pixel 9 and even the Pixel 8. And quite honestly, you barely notice the difference except for in very few niche cases.

The peak brightness is the same as the Pixel 9 as well, sitting at 2,700 nits. However, you’ll likely never see the display get that bright. As the Pixel 9 never reached that number during our testing.

The screen is protected by Gorilla Glass 3

Another small change Google made with the Pixel 9a display is the panel protection. On the Pixel 9, Google used Corning Gorilla Glass Victus 2. On the Pixel 9, Google is using Corning Gorilla Glass 3. This is a slight downgrade, but still a decent protective covering. Victus 2 is supposed to have higher drop resistance which should mean that there’s less of a chance the screen could crack if dropped.

At the same time, Corning boasts that it retains a high scratch resistance. Gorilla Glass 3 on the other hand, is rated for decent scratch resistance, but may not do as well with drops. In the long run, if you’re worried about either one, throw a case on the phone and avoid unnecessary risks. Google’s Pixel 9a is available for pre-order starting in April, and will launch the same month.