Here’s your first look at the Galaxy S24 FE design

The Samsung Galaxy S24 FE is not expected to launch until Q4 this year, and yet here’s your first look at the phone’s design. You will find a handful of renders below the article, while you can also check out the 360-degree video of the model by clicking here. Do note that the renders are CAD-based.

The Galaxy S24 FE design has been revealed way ahead of launch

These renders come from OnLeaks’ collaboration with GizNext. You will immediately notice how similar the device is to the Galaxy S23 FE. The thing is, its bezels will be thinner. Unfortunately, though, the “chin” will still be thicker and rather noticeable.

A flat display will be utilized by Samsung, with a centered display camera hole up top. Three vertically-aligned cameras will sit in the top-left corner on the back. The back side will be flat, as will the phone’s frame around the device.

A 6.5-inch display is expected

The corners of the phone will be rounded, clearly. A 6.5-inch display is tipped by the source. Its frame will likely be made out of metal, while glass will be included on the back. All the physical buttons will sit on the right-hand side.

In terms of the dimensions, the Galaxy S24 FE measures roughly 162 x 77.3 x 8mm. That is pretty much all the information that the source shared about the device.

It will probably come in two SoC variants

The Galaxy S24 FE is rumored to include the Exynos 2400 SoC or Snapdragon 8 Gen 3 chip. It will likely depend on which market you buy the device from. The availability will vary, as it does with the Galaxy S24.

A 50-megapixel main camera is also expected, while the device could include 12GB of RAM. The device is also tipped to offer 256GB of internal storage. Its predecessor did arrive in more than one variant, so… we’ll see.